Cooking fume purifier cleaning process, for soot pipe cleaning is also very important, the vertical flue cleaning, commonly used in two ways:
天天乐棋牌 1. mechanical equipment law, to spray oil in the flue, after the use of high-pressure cleaning machine for cleaning. This method is the most easy to operate, the least difficult, less work, the lowest cost cleaning method, but for cleaning cycle for half a year under the vertical flue, this cleaning method is undoubtedly the best choice.
2. opening method, by technical personnel to calculate the need to open hole spacing, opening position, size and quantity, through these holes to the flue cleaning. Finally, each hole is sealed. This method is relatively difficult, relatively high cost, but the cleaning effect is very thorough
The correct cleaning fume purifier is very important, because the oil smoke purifier attached on the grease and dirt is flammable, and not easy to get rid of, the user may use chemical solvents to clean the flammable and explosive, improper operation will cause a fire. The following steps are usually used when cleaning the soot purifier surface with a neutral detergent:
Unscrew the 1. cup, pour out the oil;
天天乐棋牌 2. remove the strainer and put it in lukewarm water with a neutral detergent and clean it with a soft brush;
3. scrub the body surface with a damp cloth dipped in a neutral detergent. It should be noted that when cleaning, must unplug the power plug; water is not allowed to wash, to prevent the computer board analysis of water; and strictly prohibited flammable cleaning agent.
The company always adhere to the continuous management innovation and scientific innovation, will win the support and trust of customers with excellent quality and perfect customer service service, welcome new and old customers to visit our company to negotiate cooperation!